|
|
269-978-1983
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Popular Products:
|
|
|
|
|
|
|
|
|
|
|
| |
|
GLB Product Listing
GLB Granular Filter Cleanse - GLB Filter Cleanse is a multi-purpose granular formulation that cleans and unclogs filters from grease, oils, and scale. This product works great on all types of swimming pool filters (sand, cartridge or D.E. filters). Filter Cleanse is a unique combination of acids and detergents which allows you to remove all filter contaminants with one product. It is compatible with chlorine, bromine, mineral purification systems, salt water pools, ozone, and biguanide sanitizers.
GLB 3 inch Stabilized Chlorine Tablets - GLB 3 Inch Stabilized Chlorine Tablets are a 24 hour Chlorine residual for slow dissolving round the clock product that releases sufficient chlorine to reduce the growth of harmful algae and micro-organisms in your pool. This product needs no filters and has 90% available chlorine. It is slow eroding, which makes it effective for use in plastic skimmers, automatic chlorinators, or floaters. This product also has a long shelf life. This effective stabilized disinfecting agent will safely kill harmful bacteria in your pool.
GLB Stabilizer - GLB Stabilizer maximizes chlorine efficiency and prevents chlorine loss due to intense sunlight.
ACTIVE INGREDIENTS:
Cyanuric Acid.................................99%
OTHER INGREDIENTS......................1%
Total ............................................100%
DIRECTIONS:
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
1. The most effective and economical use of our stabilized chlorine chemicals will be obtained if the pool water is first stabilized by adding aninitial 30 ppm of GLB Stabilizer to the pool.
2. To obtain a 30 ppm level, add 1 pound of GLB Stabilizer to the pool for each 4,000 gallons of pool water.
3. Add GLB Stabilizer slowly to surface skimmer. Make sure filter is clean with full pressure drop. Recirculate water for at least 6 hours.
4. Maintain a cyanuric acid level of 30-50 ppm using a suitable test kit. Check the concentration of cyanuric acid periodically at least once ayear.
GLB Super Charge Shock - GLB Super Charge Shock is a fast-acting, quick-dissolving, multi-purpose granular product that sanitizes, clarifies, prevents algae and shock treats your pool. Its highly effective formula is convenient, easy to use and won`t over stabilize your pool water. GLB Super Charge Shock can be used with all pool surfaces and leaves no residue. - Quick-dissolving
- Kills bacteria and controls algae
- 68% available chlorine
How to use:
Add the recommended dosage of this product during evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use a clean dry scoop to measure this product. DO NOT use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.
Opening Your Pool:
Always adjust and maintain pH within the suggested pH range. Follow "SHOCK TREATMENT" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.
Shock Treatment/Superchlorination:
Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.
Algae Control:
Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.
Additional shocking to keep water clean and clear is recommended after rain and heavy winds, heavy bather loads; increased water temperature and/or increased frequency of pool usage.
GLB Super Charge Shock - 12 Pack - GLB Super Charge Shock is a fast-acting, quick-dissolving, multi-purpose granular product that sanitizes, clarifies, prevents algae and shock treats your pool. Its highly effective formula is convenient, easy to use and won`t over stabilize your pool water. GLB Super Charge Shock can be used with all pool surfaces and leaves no residue. - Quick-dissolving
- Kills bacteria and controls algae
- 68% available chlorine
How to use:
Add the recommended dosage of this product during evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use a clean dry scoop to measure this product. DO NOT use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.
Opening Your Pool:
Always adjust and maintain pH within the suggested pH range. Follow "SHOCK TREATMENT" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.
Shock Treatment/Superchlorination:
Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.
Algae Control:
Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.
Additional shocking to keep water clean and clear is recommended after rain and heavy winds, heavy bather loads; increased water temperature and/or increased frequency of pool usage.
GLB Super Charge Shock - 24 Pack - GLB Super Charge Shock is a fast-acting, quick-dissolving, multi-purpose granular product that sanitizes, clarifies, prevents algae and shock treats your pool. Its highly effective formula is convenient, easy to use and won`t over stabilize your pool water. GLB Super Charge Shock can be used with all pool surfaces and leaves no residue. - Quick-dissolving
- Kills bacteria and controls algae
- 68% available chlorine
How to use:
Add the recommended dosage of this product during evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use a clean dry scoop to measure this product. DO NOT use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.
Opening Your Pool:
Always adjust and maintain pH within the suggested pH range. Follow "SHOCK TREATMENT" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.
Shock Treatment/Superchlorination:
Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.
Algae Control:
Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.
Additional shocking to keep water clean and clear is recommended after rain and heavy winds, heavy bather loads; increased water temperature and/or increased frequency of pool usage.
GLB Super Charge Shock - 36 Pack - GLB Super Charge Shock is a fast-acting, quick-dissolving, multi-purpose granular product that sanitizes, clarifies, prevents algae and shock treats your pool. Its highly effective formula is convenient, easy to use and won`t over stabilize your pool water. GLB Super Charge Shock can be used with all pool surfaces and leaves no residue. - Quick-dissolving
- Kills bacteria and controls algae
- 68% available chlorine
How to use:
Add the recommended dosage of this product during evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use a clean dry scoop to measure this product. DO NOT use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.
Opening Your Pool:
Always adjust and maintain pH within the suggested pH range. Follow "SHOCK TREATMENT" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.
Shock Treatment/Superchlorination:
Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.
Algae Control:
Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.
Additional shocking to keep water clean and clear is recommended after rain and heavy winds, heavy bather loads; increased water temperature and/or increased frequency of pool usage.
GLB Super Charge Shock - 6 Pack - GLB Super Charge Shock is a fast-acting, quick-dissolving, multi-purpose granular product that sanitizes, clarifies, prevents algae and shock treats your pool. Its highly effective formula is convenient, easy to use and won`t over stabilize your pool water. GLB Super Charge Shock can be used with all pool surfaces and leaves no residue. - Quick-dissolving
- Kills bacteria and controls algae
- 68% available chlorine
How to use:
Add the recommended dosage of this product during evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use a clean dry scoop to measure this product. DO NOT use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.
Opening Your Pool:
Always adjust and maintain pH within the suggested pH range. Follow "SHOCK TREATMENT" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.
Shock Treatment/Superchlorination:
Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.
Algae Control:
Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.
Additional shocking to keep water clean and clear is recommended after rain and heavy winds, heavy bather loads; increased water temperature and/or increased frequency of pool usage.
GLB Supersonic Shock - GLB Supersonic Shock is a fast-acting, quick-dissolving, multi-purpose granular product that sanitizes, clarifies, prevents algae and shock treats your pool. Its highly effective formula is convenient, easy to use and won`t over stabilize your pool water. GLB Supersonic Shock can be used with all pool surfaces and leaves no residue. - Quick-dissolving
- Kills bacteria and controls algae
- 73% available chlorine
How to use:
Add the recommended dosage of this product during evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use a clean dry scoop to measure this product. DO NOT use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.
Opening Your Pool:
Always adjust and maintain pH within the suggested pH range. Follow "SHOCK TREATMENT" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.
Shock Treatment/Superchlorination:
Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.
Algae Control:
Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.
Additional shocking to keep water clean and clear is recommended after rain and heavy winds, heavy bather loads; increased water temperature and/or increased frequency of pool usage.
GLB Supersonic Shock - 12 Pack - GLB Supersonic Shock is a fast-acting, quick-dissolving, multi-purpose granular product that sanitizes, clarifies, prevents algae and shock treats your pool. Its highly effective formula is convenient, easy to use and won`t over stabilize your pool water. GLB Supersonic Shock can be used with all pool surfaces and leaves no residue. - Quick-dissolving
- Kills bacteria and controls algae
- 73% available chlorine
How to use:
Add the recommended dosage of this product during evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use a clean dry scoop to measure this product. DO NOT use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.
Opening Your Pool:
Always adjust and maintain pH within the suggested pH range. Follow "SHOCK TREATMENT" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.
Shock Treatment/Superchlorination:
Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.
Algae Control:
Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.
Additional shocking to keep water clean and clear is recommended after rain and heavy winds, heavy bather loads; increased water temperature and/or increased frequency of pool usage.
GLB Supersonic Shock - 24 Pack - GLB Supersonic Shock is a fast-acting, quick-dissolving, multi-purpose granular product that sanitizes, clarifies, prevents algae and shock treats your pool. Its highly effective formula is convenient, easy to use and won`t over stabilize your pool water. GLB Supersonic Shock can be used with all pool surfaces and leaves no residue. - Quick-dissolving
- Kills bacteria and controls algae
- 73% available chlorine
How to use:
Add the recommended dosage of this product during evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use a clean dry scoop to measure this product. DO NOT use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.
Opening Your Pool:
Always adjust and maintain pH within the suggested pH range. Follow "SHOCK TREATMENT" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.
Shock Treatment/Superchlorination:
Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.
Algae Control:
Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.
Additional shocking to keep water clean and clear is recommended after rain and heavy winds, heavy bather loads; increased water temperature and/or increased frequency of pool usage.
GLB Supersonic Shock - 36 Pack - GLB Supersonic Shock is a fast-acting, quick-dissolving, multi-purpose granular product that sanitizes, clarifies, prevents algae and shock treats your pool. Its highly effective formula is convenient, easy to use and won`t over stabilize your pool water. GLB Supersonic Shock can be used with all pool surfaces and leaves no residue. - Quick-dissolving
- Kills bacteria and controls algae
- 73% available chlorine
How to use:
Add the recommended dosage of this product during evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use a clean dry scoop to measure this product. DO NOT use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.
Opening Your Pool:
Always adjust and maintain pH within the suggested pH range. Follow "SHOCK TREATMENT" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.
Shock Treatment/Superchlorination:
Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.
Algae Control:
Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.
Additional shocking to keep water clean and clear is recommended after rain and heavy winds, heavy bather loads; increased water temperature and/or increased frequency of pool usage.
GLB Supersonic Shock - 6 Pack - GLB Supersonic Shock is a fast-acting, quick-dissolving, multi-purpose granular product that sanitizes, clarifies, prevents algae and shock treats your pool. Its highly effective formula is convenient, easy to use and won`t over stabilize your pool water. GLB Supersonic Shock can be used with all pool surfaces and leaves no residue. - Quick-dissolving
- Kills bacteria and controls algae
- 73% available chlorine
How to use:
Add the recommended dosage of this product during evening hours while the filter is running. When adding this product to your pool, broadcast the product evenly over a wide area in the deepest part of the pool. Use a clean dry scoop to measure this product. DO NOT use the scoop for any other purpose. If any granules settle to the bottom of the pool use brush to disperse.
Opening Your Pool:
Always adjust and maintain pH within the suggested pH range. Follow "SHOCK TREATMENT" directions on this package. Allow 30 minutes for product to disperse. Test free available chlorine residual with a pool test kit. Repeat treatment as needed.
Shock Treatment/Superchlorination:
Every 7 days, or as necessary to prevent pool problems, shock treat/super chlorinate the pool by adding 9 to 18 ounces of this product per 10,000 gallons of water to provide 5 to 10 ppm available chlorine. Additional shock treatments may be required to correct problems which are caused by visible algae, high bathing loads, heavy wind and rainstorms. Additional shock treatments may also be required to correct problems such as unpleasant odors and eye irritation. Check the available chlorine with a suitable test kit.
Algae Control:
Follow "SHOCK TREATMENT" directions on this label. Add this product as close as possible to any algae on the sides or bottom of the pool. If necessary, repeat the treatment. To prevent possible staining or bleaching, take the following steps immediately after treatment: Thoroughly clean pool by brushing surface of algae growth, vacuum and cycle through filter. For preventative algae control, use your preferred algaecide product regularly. Follow label directions on the algaecide.
Additional shocking to keep water clean and clear is recommended after rain and heavy winds, heavy bather loads; increased water temperature and/or increased frequency of pool usage.
|
